Division Number of Units Required for Test

Testing will be conducted by the manufacturer or its authorised representative on a single unit of a model.

1. (a)

   For products listed in section B, Table 1, of these specifications, if the initial unit tested has TEC test results that meet the eligibility criteria but are within 10% of the limit, one additional unit of the same model must also be tested. Manufacturers must report values for both units. To qualify as ENERGY STAR, both units must meet the ENERGY STAR specification.

2. (b)

   For products listed in section B, Table 2, of these specifications, if the initial unit tested has OM test results that meet the eligibility criteria but are within 15% of the limits in any of the specified operating modes for that product type, then two more units must be tested. To qualify as ENERGY STAR, all three units must meet the ENERGY STAR specification.